Abstract
Abstract Structures, working mechanism, data collecting and processing methods of the self-made multifunctional all-electronic rheometer for polymer composites were introduced in detail. The validity of this equipment was proved by deriving the apparent shear viscosity expression under axial vibration condition and comparing the results obtained from both this self-made rheometer and Rosand Rh7D capillary rheometer at steady state. With this equipment, the effects of calcium carbonate weight fraction, particle size and vibration parameters on apparent shear viscosity of calcium carbonate filled propylene composites were investigated. The results show that: the apparent shear viscosity of the composites increases with the filled particle concentration. However, it is seldom affected by particle size within certain a range of shear rate. While the apparent shear viscosity increases with the decrease of particle size at moderate shear rate. Besides, the apparent shear viscosity declines rapidly with the increasing vibration amplitude. However it exhibits a cosinoidal or sinusoidal trend as vibration frequency increases and peaks at the resonant frequency of the composites.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.