RGO/polypyrrole-modified bioelectrode reshapes microbial communities for enhanced energy-recovering denitrification in carbon-limited wastewater.

Cooperation between autotrophic and heterotrophic denitrifiers under low C/N ratios revealed by individual-based modelling

This study studied the cultivation of granules from an expanded granular sludge bed reactor that simultaneously transforms sulfates, nitrates, and oxygen to elementary sulfur, nitrogen gas, and carbon dioxides, respectively. The living cells accumulate at the granule outer layers, as revealed by the multicolor staining and confocal laser scanning microscope technique. The microbial community comprises sulfate-reducing bacteria (SRB, Desulfomicrobium sp.), heterotrophic (Pseudomonas aeruginosa and Sulfurospirillum sp.), and autotrophic denitrifiers (Sulfurovum sp. and Paracoccus denitrificans) whose population dynamics at different sulfate and nitrate loading rates are monitored with the single-strand conformation polymorphism and denaturing gradient gel electrophoresis technique. The Desulfomicrobium sp. presents one of the dominating strains following reactor startup. At high sulfate and nitrate loading rates, the heterotrophic denitrifiers overcompete autotrophic denitrifiers to reduce SRB activities. Conversely, suddenly reducing nitrate loading rates completely removes the heterotrophic denitrifier Sulfurospirillum sp. from the granules and activates the autotrophic denitrifiers. The physical fixation of different groups of functional strains in granules fine-tunes the strains' activities, and hence the reactor performance.

This study demonstrated that a combined heterotrophic and autotrophic denitrification (HAD) process is highly effective for the simultaneous removal of acetate, nitrate, and sulfide at an efficiency of 100, 80, and 100%, respectively. In the HAD system, simultaneous sulfide, acetate, and nitrate removals were observed, which indicated that heterotrophic and autotrophic denitrification occurred simultaneously. When the sulfide was existed in HAD reactor, the main product of sulfide biooxidation was S(0). Once the sulfide was exhausted, the sulfate concentration in the HAD reactor increased and became the main end product. These results provided an alternative method to control the end sulfide biooxidation product by online monitoring sulfide concentration. Nearly half (43%) of the total clones in our mix-trophic reactor were amphitrophy denitrifiers. The autotrophic denitrifiers, heterotrophic denitrifiers, and amphitrophy denitrifiers coexisted in the HAD reactor to complete the denitrification process. Retrieved bacterial 16S rRNA gene clones affiliated with uncultured Xanthomonadaceae, Thauera, Thiobacillus, and Chromatiales were dominant.

Facultative autotrophic denitrifiers in denitrifying sulfide removal granules

Genetic engineering strategies for performance enhancement of bioelectrochemical systems: A review

<i>Harvesting Energy using Biocatalysts</i>

Nitrate contamination is a common problem in groundwater around the world. Nitrate can be cathodically reduced in bioelectrochemical systems using autotrophic denitrifiers with low energy investment and without chemical addition. Successful denitrification was demonstrated in previous studies in both microbial fuel cells and microbial electrolysis cells (MECs) with continuous current flow, whereas the impact of intermittent current supply (e.g., in a fluidized-bed system) on denitrification and particularly the electron-storing capacity of the denitrifying electroactive biofilms (EABs) on the cathodes have not been studied in depth. In this study, two continuously fed MECs were operated in parallel under continuous and periodic polarization modes over 280 days, respectively. Under continuous polarization, the maximum denitrification rate reached 233 g NO3--N/m3/d with 98% nitrate removal (0.6 mg NO3--N/L in the effluent) with negligible intermediate production, while under a 30 s open-circuit/30 s polarization mode, 86% of nitrate was removed at a maximum rate of 205 g NO3--N/m3/d (4.5 mg NO3--N/L in the effluent) with higher N2O production (6.6-9.3 mg N/L in the effluent). Conversely, periodic polarization could be an interesting approach in other bioelectrochemical processes if the generation of chemical intermediates (partially reduced or oxidized) should be favored. Similar microbial communities dominated byGallionellaceaewere found in both MECs; however, swapping the polarization modes and the electrochemical analyses suggested that the periodically polarized EABs probably developed a higher ability for electron storage and transfer, which supported the direct electron transfer pathway in discontinuous operation or fluidized biocathodes.

Bioelectrochemical systems (BESs) exploit the interaction between microbes and electrodes. A field of application thereof is bioelectrochemical remediation, an effective strategy in environments where the absence of suitable electron acceptors limits classic bioremediation approaches. Understanding the microbial community structure and genetic potential of anode biofilms is of great interest to interpret the mechanisms occurring in BESs. In this study, by using a whole metagenome sequencing approach, taxonomic and functional diversity patterns in the inoculum and on the anodes of three continuous-flow BES for the removal of phenol, toluene, and BTEX were obtained. The genus Geobacter was highly enriched on the anodes and two reconstructed genomes were taxonomically related to the Geobacteraceae family. To functionally characterize the microbial community, the genes coding for the anaerobic degradation of toluene, ethylbenzene, and phenol were selected as genetic markers for the anaerobic degradation of the pollutants. The genes related with direct extracellular electron transfer (EET) were also analyzed. The inoculum carried the genetic baggage for the degradation of aromatics but lacked the capacity of EET while anodic bacterial communities were able to pursue both processes. The metagenomic approach provided useful insights into the ecology and complex functions within hydrocarbon-degrading electrogenic biofilms.

The use of biocathodes in bioelectrochemical systems (BES) for the removal of nitrate from waste water has become a vital field for research. However, the elucidation of the underlying extracellular electron transfer (EET) fundamentals of denitrifying biocathodes is rarely done, but it is required for a deeper BES understanding and engineering. This study shows the thermodynamics of microbial electron transfer for reduction of nitrate and nitrite using bacteria immobilized on a biofilm used in BES. Thiobacillus denetrificans are best species that demonstrate both direct extracellular electron transfer and the phenomenon of microbial denitrification. The Cyclic voltammetry and chronoamperometry confirm the reduction of the nitrate at a potential of −0.46 V and the nitrite at −0.68 V vs Ag/AgCl, however the electrochemical response changes according to both the concentration and the temperature.

Bioelectrochemical system accelerates reductive dechlorination through extracellular electron transfer networks

Coupling anammox and heterotrophic denitrification activity at mainstream conditions in a single reactor unit

Enhancing anoxic denitrification of low C/N ratio wastewater with novel ZVI composite carriers

In-situ growth of graphene/polyaniline for synergistic improvement of extracellular electron transfer in bioelectrochemical systems

Direct extracellular electron transfer from Escherichia coli through modified carbon nanoparticles

The current output of an anodic bioelectrochemical system (BES) depends upon the extracellular electron transfer (EET) rate from electricigens to the electrodes. Thus, investigation of EET mechanisms between electricigens and solid electrodes is essential. Here, reticulated vitreous carbon (RVC) electrodes are used to increase the surface available for biofilm formation of the known electricigen Shewanella loihica PV-4, which is limited in conventional flat electrodes. S. loihica PV-4 utilizes flavin-mediated EET at potential lower than the outer membrane cytochromes (OMC), while at higher potential, both direct electron transfer (DET) and mediated electron transfer (MET) contribute to the current output. Results show that high electrode potential favors cell attachment on RVC, which enhances the current output. DET is the prevailing mechanism in early biofilm, while the contribution of MET to current output increased as the biofilm matured. Electrochemical analysis under starvation shows that the mediators could be confined in the biofilm. The morphology of biofilm shows bacteria distributed on the top layer of honeycomb structures, preferentially on the flat areas. This study provides insights into the EET pathways of S. loihica PV-4 on porous RVC electrodes at different biofilm ages and different set potential, which is important for the design of real-world BES.