Abstract

Manganese-rich austenitic twinning-induced plasticity (TWIP) steels with high strength and superior ductility have received much attention in the past two decades. Tremendous efforts have been made to explore their unusual hardening behaviour which includes contributions from twins, dislocations, grain boundaries and solid solution. Nevertheless, the individual hardening effects of twins, dislocations, grain boundaries and solid solution on the high strength of TWIP steels are still unclear. In the present work, the flow stress of a TWIP steel was experimentally decomposed into the respective contributions of twins, dislocations, grain boundaries and solid solution. For the forest hardening, synchrotron X-ray diffraction experiments with line profile analysis were carried out to measure the dislocation density. It is found that the yield stress of the present TWIP steel is controlled by solid solution and grain boundary hardening, which contribute to 238.3 and 238.5 MPa, respectively. After yielding, the work-hardening rate is dominated by dislocation multiplication which accounts for up to 922 MPa at a true strain of 0.4, equal to about 60% of the flow stress. In comparison, twins contribute to only 118 MPa at the same true strain, equal to about 8% of the flow stress. In other words, twins have minor effect on the flow stress, in contrast to the current understandings in the literature.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.