Abstract
The results of investigations of first 500 kg Nb3Sn bronze strand are presented. This batch of strands was meant for the production of 100 m of Toroidal Field Conductor in the frame of fulfillment the Phase II of Procurement Arrangement between Russian Domestic Agency and International Organization ITER. In order to provide the industrial-scale production of strands design documentation and all necessary quality assurance documents were developed. The developed industrial technology of Nb3Sn strand production was applied in Joint Stock Company Chepetsky Mechanical Plant (JSC ChMP). Strands were produced in JSC ChMP from final billets with diameter of 203 mm. The microstructure investigations of produced strands were performed before and after diffusion annealing by optical microscopy, X-ray microprobe analysis. Mechanical properties of annealed Nb3Sn strands were investigated. Current-carrying capability of Nb3Sn strands at 12 T, 4.22 K were studied. It was shown, that all produced strands met all the requirements, in particular Ic was from 202 to 220 A; hysteresis losses were from 165 to 194 mJ/cm3 (± 3 T ).
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.