Abstract
A 110 GHz quasi-optical ring resonator, designed for use with a 1 MW pulsed gyrotron, has been built and successfully tested using a 100 mW solid-state source. A low reflectance (2.4%) input coupler and a low-loss, four-mirror ring demonstrated a compression ratio, defined as the ratio of output to input power, of 36. The 6 ns output pulses were generated from the 2 m length ring using a silicon laser-driven semiconductor switch (LDSS). The quasi-optical ring resonator was designed with large waist sizes so that input pulses of up to 1 MW will stay under the 35 kV/cm electric field limit for ionization in ambient air. Maximum compression gain was achieved by matching the input coupling fraction to the round trip loss in the ring, achieving close to critical coupling. The experimental output pulse shape obtained after firing the LDSS was modeled using the reflectance, transmittance, and absorptance of the switch vs. time and vs. laser pulse fluence, with good agreement found with theory. The timing for the peak energy efficiency of 32% was found and the main loss mechanism limiting that efficiency was found to be the absorptance in the silicon wafer.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of Infrared, Millimeter, and Terahertz Waves
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.