Abstract
A de-noising method based on the combination of wavelet and Ensemble Empirical Mode Decomposition (WEEMD) theory is proposed for de-noising of leakage current signal. Results show that the proposed method is effective to extract leakage current signals. The noise in the leakage current get by a non-inductance resistance with 1 ohm is very large, and the noise signal almost drowns the leakage current signal. After de-noising, the denoising effect of the leakage current signal is not ideal, and the characteristics of the leakage current itself are lost. Because of the higher signal-to-noise ratio (SNR) of the leakage current which measured by 5 ohm and 50 ohm non-inductance resistance, the de-noised effect is much better. Therefore, the hardware measures are taken to reduce the noise contained in the leakage current signal, and then the clean leakage current signal can be obtained by de-noising method proposed in this paper.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.