Research on dual‐coupled wireless power transfer system for cardiac pacemaker based on integrated coils

Abstract

SummaryIn order to reduce the implantation volume and improve the transmission efficiency of the magnetically coupled resonant wireless power transfer system for cardiac pacemakers, a dual‐coupled wireless power transfer system for cardiac pacemakers that integrates a compensation coil into the main coil was designed. First, the mutual inductance equivalent model of the dual‐coupled wireless power transfer system was established and the impedance matching parameters were solved. The double‐sided inductor–capacitor–inductor (DS‐LCL) circuit simulation model considering the equivalent series resistance was established with MATLAB. The influence of different inductance ratios on the output power and transfer efficiency of the system was analyzed in the range of 200–300 kHz, and the system parameters for optimal transfer efficiency were determined. Second, the compensation coil on the same side was naturally decoupled by changing the aspect ratio of the compensation coil. The magnetic field distribution between the internally integrated dual‐coupled structure proposed in this paper and the conventional integrated structure was compared using COMSOL, and the safety assessment of the system was conducted, considering parameters such as temperature rise and specific absorption rate. Finally, an experimental platform was established to verify the system's output performance and safety. The results showed that compared with conventional integrated structures, the proposed integrated structure increased the output power by 0.229 W and transmission efficiency by 10.08% at a transmission distance of 8 mm. The maximum temperature rise is 1.9°C.