Research on assembly accuracy of deployable arm based on Jacobian-Torsor model

Abstract

PurposeThe purpose of this study is to establish an assembly accuracy analysis model of deployable arms based on Jacobian–Torsor theory to improve the assembly accuracy. Spacecraft deployable arm is one of the core components of spacecraft. Reducing the errors in assembly process is the main method to improve the assembly accuracy of spacecraft deployable arms.Design/methodology/approachFirst, the influence of composite connecting rod, root joint and arm joint on assembly accuracy in the tandem assembly process is analyzed to propose the assembly accuracy analysis model. Second, a non-tandem assembly process of “two joints fixed-composite rod installed-flange gasket compensated” is proposed and analyzed to improve the assembly accuracy of deployable arms. Finally, the feasibility of non-tandem assembly process strategy is verified by assembly experiment.FindingsThe experiential results show that the assembly errors are reduced compared with the tandem assembly process. The errors on axes x, y and z directions decreased from 14.1009 mm, 14.2424 mm and 0.8414 mm to 0.922 mm, 0.671 mm and 0.2393 mm, respectively. The errors round axes x and y directions also decreased from 0.0050° and 0.0053° to 0.00292° and 0.00251°, respectively.Originality/valueThis paper presents an assembly accuracy analysis model of deployable arms and applies the model to calculate assembly errors in tandem assembly process. In addition, a non-tandem assembly process is proposed based on the model. The experimental results show that the non-tandem assembly process can improve the assembly accuracy of deployable arms.