Abstract
In this paper, the pretreatment, concentration reduction and evaporation crystallization stages of desulfurization wastewater in zero discharge technology were studied and engineering applications were carried out, and the performance of 660MW coal-fired unit zero discharge desulfurization wastewater was evaluated. The results showed that for desulphurization wastewater with a total dissolved solid of about 48768.9 mg/L and a Cl content of about 12507.2mg/L, the pass flue gas evaporation process could realize zero discharge treatment of desulphurization wastewater. The hot smoke content introduced into the drying tower was about 52351.0m <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sup> /h, the inlet and outlet smoke temperatures of the drying tower were 374°C and 130°C respectively, the influence on boiler efficiency was about 0.0676%, and the moisture content of drying products was only 0.15%. The content of HCl in the flue gas at the inlet and outlet of the drying tower was 53mg/L and 165mg/L, the mass fraction of Cl removal and volatilization of desulfurized wastewater were 93.10% and 6.90%, the average content of chlorine in fly ash was about 0.225%, which meet the requirements of relevant standards for the comprehensive utilization of fly ash.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
