Abstract
The probabilistic fault displacement hazard analysis is one of the new methods in estimating the amount of possible displacement in the area at the hazard of causal fault rupture. In this study, using the probabilistic approach and earthquake method introduced by Youngs et al., 2003, the surface displacement of the North Tabriz fault has been investigated, and the possible displacement in different scenarios has been estimated. By considering the strike-slip mechanism of the North Tabriz fault and using the earthquake method, the probability of displacement due to surface ruptures caused by 1721 and 1780 North Tabriz fault earthquakes has been explored. These events were associated with 50 and 60 km of surface rupture, respectively. The 50–60 km long section of the North Tabriz fault was selected as the source of possible surface rupture. We considered two scenarios according to possible displacements, return periods, and magnitudes which are reported in paleoseismic studies of the North Tabriz fault. As the first scenario, possible displacement, return period, and magnitude was selected between zero to 4.5; 645 years and Mw~7.7, respectively. In the second scenario, possible displacement, return period and magnitude were selected between zero to 7.1, 300 years, and Mw~7.3, respectively. For both mentioned scenarios, the probabilistic displacements for the rate of exceedance 5 % in 50, 475, and 2475 years for the principle possible displacements (on fault) of the North Tabriz fault have been estimated. For the first and second scenarios, the maximum probabilistic displacement of the North Tabriz fault at a rate of 5 % in 50 years is estimated to be 186 and 230 cm. Also, mentioned displacements for 5 % exceedance in 475 years and 2475 years in both return periods of 645 and 300 years, are estimated at 469 and 655 cm.
Highlights
Earthquakes, because of earth-shaking and because of surface ruptures, are a serious threat to many human activities
According to the study of Petersen et al (2011), the trace of the North Tabriz fault was considered as a simple trace due to the absence of large instrumental earthquakes that are associated with surface rupture
In hazard analysis of fault displacement, it is necessary to investigate the possibility of surface rupture with magnitude (M) on the ground so as a result, the equation (5) introduced by Wells and Coppersmith (1993) can be used
Summary
Earthquakes, because of earth-shaking and because of surface ruptures, are a serious threat to many human activities. According to the study of Petersen et al (2011), the trace of the North Tabriz fault was considered as a simple trace due to the absence of large instrumental earthquakes that are associated with surface rupture. The earthquake approach is similar to the analysis of probabilistic seismic hazard related to displacement, features such as faults, partial shear, fracture, or unbroken ground at or near the ground surface so that the attenuation relationships of the fault displacement replace the ground shaking relationships. Each of the parameters for estimation of probabilistic fault displacement hazard is described
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.