Abstract
AbstractBACKGROUNDThe pollution of the aquatic environment by pharmaceuticals has become a serious problem. Conventional technologies applied in water or sewage treatment plants are not effective in drugs removal, therefore there is an urgent need to develop new methods.RESULTSThe removal of diclofenac (DCF), ibuprofen (IBU) and naproxen (NAP) sodium salts in a photocatalytic membrane reactor (PMR) utilizing direct contact membrane distillation and UV‐C radiation from ultrapure water, tap water, primary effluents (PE) and secondary effluents (SE) of municipal wastewater treatment plant is presented. When PE were used as feed and TiO2 loading of 0.5 g dm−3 was applied, DCF was removed completely, IBU amount decreased for 73% and NAP for 90%. In the case of SE, DCF, IBU and NAP concentrations decreased by 100%, 93% and 94%, respectively (1.5 gTiO2 dm−3). Mineralization was low and did not exceed 14% for PE and 23% for SE. No drugs were found in the distillate, however, it contained high level of N‐NH4+, especially in PE.CONCLUSIONThe hybrid system can be an effective technology for the removal of pharmaceuticals from SE and PE, however, owing to membrane fouling the latter should be pretreated before application in the PMR. © 2014 Society of Chemical Industry
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of Chemical Technology & Biotechnology
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.