Abstract
Excessive nitrate in the water impose a danger to human health and contribute to eutrophication. The present continuous fixed bed pilot study was carried out using granular activated carbon made from walnut shell for removal of nitrate from aqueous solution and natural groundwater. The carbon was characterized using SEM, FTIR and BET. The BET specific surface area and average pore size before nitrate adsorption were 1434.6 m2g−1 and 2.08 nm, respectively, and after were 633.28 m2g−1 and 2.04 nm, respectively. Optimum removal of nitrate was achieved at a contact time of 2 min, pH of 6.5 and a nitrate concentration of 200 mg/l. The hydraulic loading rate was calculated to be 10 m3/h.m2 and the maximum adsorption capacity using the Langmuir adsorption isotherm model (R2 = 0.99) was 10 mg NO3/g. These experiments were also carried out using groundwater and the removal of nitrate decreased from 68% to 60% because of competition with other cations and anions.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
