Abstract
AbstractThe problem of high fluoride in water sources in Africa and the rest of the developing world has exacerbated in the latest past due to increasing shortage of water. More people are being exposed to high water fluoride resulting in elevated levels of fluorosis in the societies. Fluoride (F) adsorption from solutions using a siliceous mineral from Kenya (M1) was studied on batch basis and results verified on high fluoride water using fixed‐bed column experiments. About 100% batch F adsorption was achieved at 200 mg/L F concentration, 0.5 g/mL adsorbent dosage, 303–333 K, and pH 3.4 ± 0.2. Based on Giles classifications, F adsorption isotherm was found to be an H3 type isotherm. The equilibrium data was correlated to Freundlich and Langmuir models and the maximum Langmuir adsorption capacity was found to be 12.4 mg/g. Column experiments were conducted for different fluoride concentrations, bed depths, and flow rates. The F breakthrough curves were analyzed using the Thomas model and efficient F adsorption was found to occur at low flow rates and low influent concentrations. The Thomas F adsorption capacity (11.7 mg/g) was consistent with the Langmuir isotherm capacity showing that M1 could be applied as an inexpensive medium for water defluoridation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
