Abstract
Abstract The need of safe and economical methods for the elimination of hazardous dyes from contaminated waters has necessitated research interest towards the production of low-cost adsorbent. The present study aims to investigate the feasibility of rubber seed shell-based biosorbent for removal of crystal violet dye from aqueous solutions. The biosorbent was prepared using sulfuric acid treatment. Fourier transform infrared analysis showed that the main functional groups present on the surface of the biosorbent were aliphatic compounds. Batch adsorption studies were conducted to determine the effects of contact time, initial dye concentration and biosorbent dosage on the uptake of dye at 30 °C. The equilibrium data were analyzed by using Langmuir and Freundlich isotherm models. Equilibrium data fitted well with the Langmuir model, yielding maximum monolayer adsorption capacity of 23.81 mg/g. The kinetic data were found to conform to pseudo-second-order kinetic model with good correlation. Rubber seed shell-based biosorbent was shown to be a promising low-cost material for adsorption of crystal violet dye from aqueous solutions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
