Removal of copper(II) from aqueous solution using chemically modified fruit peels as efficient low-cost biosorbents

Abstract

Fruit peels, which are common agricultural byproducts, have been extensively used as abandoned or low-cost biosorbents to remove heavy metals. In this study, dragon fruit peel (DFP), rambutan peel (RP), and passion fruit peel (PFP) were used to remove Cu(II) ions from an aqueous solution. Concentrations of the adsorbed metal ions were determined using the atomic absorption spectroscopic method. Adsorption experiments were performed with different adsorbent dosages, pH values, contact times, and initial copper concentrations. The optimum set of conditions for biosorption of Cu(II) ions was found to be an adsorbent dosage of 0.25 g, a contact time of 180 min, an initial concentration of 100 mg/L, a pH value of 4 for RP and PFP, and a pH value of 5 for DFP. The adsorption conformed with the pseudo-second-order kinetic model. The adsorption data were consistent with the Langmuir and Freundlich isotherm models, but the best fit was with the Langmuir model. The Langmuir monolayer adsorption capacity values of DFP, RP, and PFP were calculated to be 92.593, 192.308, and 121.951 mg/g, respectively. RP showed a higher adsorption capacity of Cu(II) ions than PFP and DFP for all parameters. The results indicate that these biosorbents might be used to effectively adsorb Cu(II) ions from wastewater treatment plants.