Abstract
This study shows the technical feasibility to recover uranium from copper Pregnant Leaching Solutions (PLS) using ion-exchange, after a removal of chloride ions using the electrodialysis (ED) technique. The original copper PLS solutions came from the National Copper Corporation (CODELCO), from their hydrometallurgical operations, which contained high concentrations of chloride ions. These solutions contained average concentrations of 22 g/L chloride ions, pH 1.5 – 1.8 and 20 mg/L uranium. The high chloride contents made the uranium recovery technically unfeasible, because of the high volumes of chemical reagents needed to operate. To eliminate the chloride ions selectively, a modified electrodialysis (ED) process was developed. The ED process was made of a three–compartment cell. This system removed selectively the chloride ions, and replaced them with sulphuric ions, without modifying the composition of the copper PLS solution, to allow a continuous operation of the copper production plant. The ED process decreased the chloride content from 22 g/L to 6 g/L. Finally, static and dynamic load tests were performed for both the original PLS and the treated PLS, using 3 different anion-exchange resins: Dowex-1, Lewatit A365 and Lewatit MP62-WS. The loading capacity of the ion-exchange resins was increased 4 times approximately.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
