Reduction of Manganese Oxides by Methane-containing Gas

Abstract

The paper presents results of reduction of pure manganese oxides by methane containing gas in non-isothermal and isothermal experiments and reduction mechanisms. The extent and rate of manganese oxide reduction were determined by on-line off-gas analysis using a mass-spectrometer in a fixed bed laboratory reactor in the temperature range 1000-1200°C at different gas compositions.Manganese oxides were reduced to carbide Mn7C3. High extent and rate of reduction by methane-containing gas in comparison with carbothermal reduction were attributed to high carbon activity in the reducing gas, which was in the range 15-50 (relative to graphite). The rate of reduction of manganese oxide increased with increasing temperature. Increasing methane content in the reducing gas to 10-20 vol% CH4 favoured the reduction process. Increase in hydrogen partial pressure had a positive effect on the reduction rate. Addition of carbon monoxide to the reducing gas retarded the reduction process. The addition of Fe3O4 to manganese oxide increased the rate of reduction.Reduction by methane-containing gas occurs through adsorption and cracking of methane with formation of active adsorbed carbon. Deposition of solid carbon retarded the reduction.