Reduction of combustion by-products in WTE plants: O 2 enrichment of underfire air in the M artin S yncom process

Abstract

The S yncom process involves oxygen enrichment of underfire air, recirculation of flue gas and a combustion control system using infrared thermography of the waste layer on the grate. At the demonstration plant in Coburg, operational reliability and plant availability using S yncom could be proven under real disposal conditions with a waste throughput of 7 t/h. Oxygen enrichment of the underfire air promotes the destruction of pollutants due to the high oxygen partial pressures and temperatures. This is then reflected in very low residual amounts of organic combustion by-products in the bottom ash and flue gas from the S yncom unit. The flue gas concentrations of organic pollutants are reduced, as compared with conventional operation, by over 35% (for CO, total hydrocarbons and PCDD/F) at the boiler outlet. As the flue gas flow is reduced by oxygen enrichment and flue gas recirculation, the resulting reduction in terms of kg of pollutant per Mg of waste is even higher. In the bottom ash, the level of organic residues is reduced, by 45% in the case of loss on ignition and by 55% in the case of TOC and dioxins (I-TE of PCDD/F). This is due to the higher oxygen partial pressures and the fuel bed temperature which is increased by 135 to 1200°C. Other important features of the process include more intense sintering and thus improved immobilization of the bottom ash, as well as reduced flue gas and fly ash flows.