Abstract
Abstract Effects of Polyethylene glycol (PEG) addition to cathode catalyst ink were investigated by changing the addition amount of PEG. Performance of the polymer electrolyte membrane fuel cells (PEMFCs) increased and then decreased at the higher current density than 1.5 A/cm2 as the amount of PEG addition increased. However, durability was not changed by the addition of PEG to the catalyst ink. Three different molecular weights of PEG were compared for PEG additives to cathode catalyst ink. Performance at high current density region increased and then decreased as PEG molecular weight increases from 200 to 10000. Increased performance by addition of PEG was attributed from reduced mass transport resistance. However, addition of large molecular weight PEG to catalyst ink reduced the performance because it lowered ionomer conductivity in the catalyst layer and then reduced proton transport resistance. Increased pore size in the catalyst layer and increased hydrophilicity on the electrode were also analyzed by addition of PEG to catalyst ink.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
