Reclamation of acid waters using sewage sludge.

Abstract

An exhausted sand quarry which had filled with acid water (pH 3) from the oxidation of pyrite was treated with calcium hydroxide to neutralize the water (pH 8), and sewage sludge to prevent further ingress of acid. The water remained neutral for 2 years, an appreciable quantity of base being generated by the reduction of sulphate to sulphide in the anoxic sediment formed by the sewage sludge. After this time the water reverted to acid conditions, chiefly because the lake was too shallow to retain the sewage sludge over a sufficiently large area of its bed. Incubation experiments showed that the sewage sludge had a large capacity for sulphate reduction, which was equally efficient in acid or neutral waters and that the areal rate of consumption was sufficiently fast to neutralize all incoming acid, if at least 50% of the lake bed was covered with sludge. Throughout the course of the field investigations there was no foul smell and the lake was quickly colonized by phytoplankton, macrophytes and insects. Although nutrients associated with the sewage sludge stimulated photosynthesis and so caused the generation of additional organic matter, they were exhausted within two years. To ensure permanent reclamation, phosphate fertilizer could be added once the initial supply has been consumed. Neutralization removed trace metals from the system, presumably due to formation of insoluble oxyhydroxide and carbonates. The solubility of aluminium was apparently controlled by a basic aluminium sulphate (jurbanite).