Real-Time Scan-to-Map Matching Localization System Based on Lightweight Pre-Built Occupancy High-Definition Map

Abstract

Listen

Translate article

High-precision and robust localization in GNSS-denied areas is crucial for autonomous vehicles and robots. Most state-of-the-art localization methods are based on simultaneous localization and mapping (SLAM) with a camera or light detection and ranging (LiDAR). However, SLAM will suffer from drift during long-term running without loop closure or prior constraints. Lightweight, high-precision environmental maps have gradually become an indispensable part of future autonomous driving. In order to solve the problem of real-time global localization for autonomous vehicles and robots, we propose a precise and robust LiDAR localization system based on a pre-built, occupied high-definition (HD) map called the Extended QuadTree (EQT) map. It makes use of a planar quadtree for block division and a Z-sequence index structure within the block cells. Then, a four-level occupancy probability cell value model is adopted. It will save about eight times the storage space compared with Google Cartographer, and the EQT map can be extended to store other information. For efficient scan-to-map matching with our specialized EQT map, the Bursa linearized model is used in the Gauss–Newton iteration of our algorithm, which makes the calculation of partial derivatives fast. All the above improvements lead to optimal storage and efficient querying for real-time scan-to-map matching localization. Field tests in an industrial park and road environment prove that positioning accuracy of about 6–13 cm and attitude accuracy of about 0.15° were achieved using a VLP-16 LiDAR. They also show that the method proposed in this paper is significantly better than the NDT method. For the long and narrow environment of an underground mine tunnel, high-resolution maps are also helpful for accurate and robust localization.