Abstract
We have developed a new production technology of deep trenches RIE with a photoresist mask. RIE was performed in a low-pressure batch diode reactor. Wafers were placed on RF (5,28 MHz) electrode covered by organic lacquer. The maximum loading was 24 wafers having a diameter of 100 mm. Positive photoresist with 2 micron thickness was used for masking without any thermal treatment after development. The line width was 1.5 - 2.0 micron. Because earlier investigated mixtures of chlorine and bromine-containing halocarbons with SF6 didn't allow sufficient selectivity silicon/photoresist, we have proposed to use for deep silicon etching the mixture of CF3I/SF6 and investigated the dependence of silicon and photoresist etch rates and etch anisotropy on basic controlled plasma parameters.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.