Abstract
ABSTRACTCarbon fiber-carbon matrix composites were fabricated using the forced flow-thermal gradient chemical vapor infiltration (FCVI) process. Preforms were prepared by stacking 40 layers of plain weave carbon cloth in a graphite holder. The preforms were infiltrated using propylene, propane, and methane. The present work showed that the FCVI process is well suited for fabricating carboncarbon composites; without optimization of the process, we have achieved uniform and thorough densification. Composites with porosities as low as 7% were fabricated in 8–12 h. The highest deposition rate obtained in the present study was ∼3 μm/h which is more than an order of magnitude faster than the typical value of 0.1–0.25 μm/h for the isothermal process. It was also found that the use of propylene and propane as reagents resulted in faster infiltration compared to methane.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
