Abstract
The technology to sinter copper inks in air is beneficial for the applications in flexible printed electronics. However, copper based ink could hardly produce conductive copper patterns when sintered in air, because copper is easily oxidized. In this study, a convenient fabrication process for conductive copper films with a simple heat treatment on hotplate in air was successfully developed. The ink was prepared by mixing copper submicron particles with formic acid and an amino-alcohol. The copper oxide on the surface of untreated copper submicron particles was converted to decomposable copper formate. More importantly, the copper submicron particles could be activated by the chemisorbed HCOOH to sinter at low temperatures. 3-Dimethylamino-1,2-propanediol (DMAPD) was introduced to protect copper from oxidation when sintered in air. In addition, DMAPD could promote the decomposition of copper formate by forming copper–amine complex. A resistivity of 54 ± 2 μΩ cm was obtained after sintered at 200 °C for 50 s (63 ± 4 μΩ cm for only 10 s). This simple, convenient and rapid sintering of submicron copper inks in air provides an alternative fabrication method of copper patterns in printed electronics.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Journal of Materials Science: Materials in Electronics
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.