Abstract
By introduction of the chemical effects of fluorine, thick cubic boron nitride (cBN) films with high phase purity and low residual stress were synthesized on silicon substrates by dc-bias-assisted dc jet chemical vapor deposition in an Ar–N2–BF3–H2 system. In this paper, the characterization of the films by scanning electron microscopy, glancing-angle x-ray diffraction, infrared spectroscopy, and Raman spectroscopy was done. Among these techniques, Raman spectroscopy was intensively studied, and a method was established to evaluate the crystallinity and residual stress of the cBN films from the line width and peak shift of Raman charactersitic peaks. The influences of the experimental parameters, i.e., bias voltage, substrate temperature, and deposition time, on the film quality were systematically studied. An experimental window for the deposition of cBN films was described. The cBN films deposited under optimized conditions showed the similar line width of both Raman TO and LO modes and thus a crystallinity comparable to that of 4–8-μm cBN single crystals synthesized by high-ressure and high-temperature methods.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.