Abstract
This paper presents novel multi-band equilateral triangular microstrip antennas (ET-MSAs) fed by an L-shaped feeding probe. Two types of the ET-MSA are proposed in this paper; they are ET-MSA with closed folded slots and open folded slots with an embedded bridge. The antenna prototypes presented in this paper assume four folded slots in which a metal strip is inserted to realize a good multi-band performance. In addition, the open folded slots, in which the metal strip inside the folded slot is connected to the ET-MSA by the embedded metal bridge, leads to miniaturize the antenna. The proposed antennas are printed on the top layer of a PTFE substrate while the L-probe is printed on the bottom one. The L-shaped probe is utilized due to its tremendous performance in providing a wideband impedance matching. Five resonant frequencies of the ET-MSAs with closed folded slots and with open folded slots are predicted by the electromagnetic simulator (IE3D) based on the method of moment, respectively. Some parametric studies have been also investigated to meet an appropriate multi-band performance. A broadside radiation pattern and gain of 3.0-7.0dBi have been confirmed by the measurement for the entire observed frequencies. Measured results agree well with the prediction. Thus, these antenna systems are demonstrated to be useful models for a multi-band planar antenna.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
