Abstract
Model Pt/Ce0.9Pr0.1O2 and Pt/CeO2 NOx storage–reduction catalysts were prepared via nitrate calcination, co-precipitation and carbon-templating routes. Raman spectroscopic data obtained on the catalysts indicated that the introduction of praseodymium into the ceria lattice increased the concentration of defect sites (vacancies), arising from the higher reducibility of the Pr4+ cation compared to Ce4+. For the Pr-promoted samples, H2-TPR profiles contained high temperature bulk reduction peaks which were less pronounced compared with their ceria analogs, indicating that the presence of praseodymium enhances oxygen mobility due to the creation of lattice defects. Under lean-rich cycling conditions, the cycle-averaged NOx conversion of the Pt/Ce0.9Pr0.1O2 samples was in each case substantially higher than that of the Pt/CeO2 analog, amounting to a difference of 10–15% in the absolute NOx conversion in some cases. According to DRIFTS data, a double role can be assigned to Pr doping; on the one hand, Pr accelerates the oxidation of adsorbed NOx species during the lean periods. On the other hand, Pr doping destabilizes the adsorbed NOx species during the rich periods, and the kinetics of nitrate decomposition are faster on Pt/Ce0.9Pr0.1O2, leading to improved catalyst regeneration. These results suggest that ceria-based mixed oxides incorporating Pr are promising materials for NOx storage–reduction catalysts intended for low temperature operation.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
