Abstract
Carbon nanotubes (CNTs) were introduced into the precursor infiltration and pyrolysis (PIP) carbon fiber reinforced silicon carbide matrix (C f/SiC) composite via the infiltration slurry. The weight fraction of CNTs in the composite was 0.765‰. The fiber–matrix interface coating was prepared through chemical vapor deposition (CVD) process using methyltrichlorosilane (MTS). Effects of the CNTs on mechanical and thermal properties of the composite were evaluated by three-point bending test, single-edge notched beam (SENB) test, and laser flash method. Attributed to the introduction of the small quantity of CNTs, flexural strength and fracture toughness of the C f/SiC composite both increased by 25%, and thermal conductivity at room temperature increased by 30%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
