Abstract

Indoor air quality monitoring sensor devices that are simple to operate, low cost and readily available were tested in an apparatus capable of preparing, storing, and manipulating air samples. Suitably prepared air samples were captured and measured with the apparatus emulating the conditions anticipated in the target application, i.e the detection of humans in confined and poorly ventilated spaces during Urban Search and Rescue Operations. The apparatus and the testing methodology, that were designed in order to evaluate the suitability of the selected sensors for implementing an electronic nose (e-nose) for human detection, are presented. Currently an e-nose system that is under development, adopted the architecture finalized in the presented work, and is intended to be used during the Assessment, Search and Rescue (ASR) stage 4 of a USaR operation as part of the sensor payload of a remotely controlled robot that enters the rubble of collapsed structures searching for trapped victims. The planned prototype will be tested in near realistic conditions.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.