Production of the Roman Cement in Italy: characterization of a raw material used in Tuscany between 19th and 20th century and its comparison with a commercialized French stone material

Abstract

ABSTRACTAn experimental approach in order to investigate the possibility that some Italian limestones were used for the production of Roman Cement is proposed. Three types of Pietra Alberese, a marly limestone used since Roman times for the production of “lime” in Tuscany (Italy), were selected. By burning of these stones, specimens of binders were realized. The characteristics of these binders were compared with the binder obtained by burning a French marly limestone commercially used for the production of Roman Cement.All samples of carbonate stones were preliminarily characterized from the chemical, mineralogical, and petrographic point of view. The colorimetric coordinates were measured on both rock samples and hardened binder samples. The analysis carried out shows that Pietra Alberese with an high content of clay minerals develops a similar microstructure with respect to that developed by the French marly limestone used for the production of Roman Cement.