Abstract
Until now various oxygen carrier particles have been proposed for use in chemical looping processes. Their chemical performance is determined not only by their composition and their microstructure/morphology but also by the reaction condition of the processes in which they are utilized. In the present work, iron based oxygen carriers supported on Al2O3 and MgAl2O4 were spray dried and heat treated to have a suitable morphology and sufficient mechanical properties for chemical looping. The MgAl2O4-support was in situ generated from MgO and Al2O3 by reaction sintering. After physical characterization and determining their compressive strength the oxygen carriers were tested in the chemical looping reforming process for producing syngas in a lab-scale batch fluidized-bed reactor. The suitability of utilizing steam regeneration was investigated for both oxygen carriers by relating their chemical performance to their composition. It was shown that the Al2O3-supported oxygen carrier deactivated after 9 cycles of steam regeneration because of the accumulation of an in-situ formed FeAl2O4-phase due to an irreversible reaction between support and the active phase. This deactivation was successfully avoided by replacing the Al2O3-support with MgAl2O4. This Fe2O3/MgAl2O4 oxygen carrier could be subsequently regenerated by steam, making it suitable for chemical looping for hydrogen generation.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
