Abstract
Abstract Jatropha curcas oil (JCO) has been recognized as a viable non-edible feedstock for biodiesel production with the focus of achieving lesser reliance on fossil fuels. The aim of this work is to integrate and simulate the production of biodiesel from Jatropha curcas oil by a two-step process; a hydrolysis step and a trans-esterification step. The challenge is then to optimise the feedstock ratios to obtain the minimal water and methanol consumption to give optimal biodiesel yield. For this purpose, steady-state simulation model of a two-step production process of biodiesel from Jatropha curcas oil was prepared using ASPEN Plus V8.8. The response surface methodology (RSM) based on a central composite design (CCD) was used to design optimisation experiments for the research work. From the ANOVA, methanol/oil ratio of the trans-esterification step was found to have a significant effect on the biodiesel yield compared to the water/oil ratio of the hydrolysis step. The linear model developed was shown to be a good predictor of feedstock ratios for biodiesel yield. The surface plot revealed that both feedstock ratios do not show a significant combinatorial effect on each other. Numerical optimisation gave the optimum values of the feedstock ratios as a methanol/oil ratio of 2.667 and a water/oil ratio of 1. The optimisation results also indicated a predicted optimum biodiesel yield of 10.0938 kg/hr.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
