Abstract
This Paper Presents the Optimization of Injection Molding Conditions to Minimize the Warpage and Volumetric Shrinkage Using Design of Experiments and Taguchi Optimization Method. Considering the Process Parameters such as Injection Time, Packing Pressure, Packing Pressure Time, and Cooling Time, a Series of Mold Analysis are Performed. Orthogonal Arrays of Taguchi, the Signal-to-Noise(S/N) and Analysis of Variance (ANOVA) are Utilized to Determine the Optimization Parameter Levels and to Find out Principal Processing Parameters on Warpage and Volumetric Shrinkage. from the Results it is Clear that Warpage and Volumetric Shrinkage are Reduced. also, the Dominant Parameters were Cooling Time and Packing Time for Warpage, on the other Hand, the most Important Factor for Shrinkage was Injection Time. from this, it can be Concluded that Taguchi Method is very Suitable to Solve the Warpage and Volumetric Shrinkage Problems in Injection Molding Parts.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
