Abstract
The aluminium alloy milling wastewater belongs to high concentration organic alkaline wastewater, the pH value is up to 13-14, and the COD concentration is 3000mg/L-3300mg/L, if direct discharge into water bodies without harmless treatment can seriously endanger the ecological environment and human health. In this study, the micro-electrolysis process was used to pre-treat the aluminium alloy milling wastewater, and the COD removal rate was the indicator. Under the condition that the mass ratio of iron to carbon is 1:2, the dosage of iron is 67g/L, the pH is 3, and the reaction time is 60min, the average removal rate of COD in aluminium alloy milling wastewater can reach 71.34%. The kinetic analysis of the process of pre-treatment of aluminium alloy milling wastewater by micro-electrolysis process is in accordance with the first-order kinetic model. The dynamic equation is: .
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: IOP Conference Series: Earth and Environmental Science
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
