Abstract
In this work, Ti2AlN porous ceramics was made by the organic foam impregnation. High-purity Ti2AlN powder was sintered at 1300 °C for 2 h of Ti/1.1Al/TiN in stoichiometric proportion. The slurry solids of organic foam impregnation method was 60 %, using 2 % polyacrylamide as dispersant, 0.5 % polyvinyl alcohol as a binder and 0.5 % ethanol as defoaming. The polyurethane sponge was pre-treatment for 6 h with 15 % NaOH solution and soak for 24 h with 4 % of carboxymethyl cellulose (CMC) solution. Through the pre-treatment, the polyurethane sponge hangs pulp quantity is higher, and the percentage of plugged hole is the lowest. The Ti2AlN porous ceramics is relatively uniform open holes with three-dimensional skeleton structure. This study can generate to the studies of the preparation of the mesh structure products and the preparation of ceramic matrix composites by pressureless infiltration process.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.