Abstract
High performance silicalite-1 membranes were successfully synthesized on silica tubes by seeding method after filling the tubes with water and glycerol mixtures. After seeding the silica tubes with 200 nm seeds, all the silicalite-1 membranes show acceptable separation performance towards ethanol/water mixture after 4-12 h hydrothermal synthesis, and the highest flux of membrane with 8 h hydrothermal synthesis reaches about 0.98 kg/m2.h and the separation factor reaches about 60 towards 3 wt.% ethanol/water mixture. This result shows that the as-synthesized silicalite-1 membrane can concentrate the ethanol from 3% to about 65%, and the ethanol can be obtained over 600 g/m2.h by using the silicalite-1 membrane, which shows that seeding method and suitable control of synthesis conditions is possible for preparing high-performance silicalite-1 membranes.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
