Preparation of Reinforced poly (BisGMA-UDMA) Graphene-Based Nanocomposites Via Moderate in Situ SET-LRP

Abstract

ABSTRACTIn the present study, cross-linked poly (dimethacrylate- urethane dimethacrylate) [poly (BisGMA-UDMA)] functionalized-graphene oxide nanosheets were prepared via single-electron transfer living radical polymerization (SET-LRP) using the ‘grafting from’ strategy, under mild conditions. This method first involves the covalent attachment of Br-containing groups onto the surface of grapheme sheets to give the initiating-groups-containing graphene (G-Br). After that, the succeeding SET-LRP polymerization in DMSO in the presence of a Cu wire/Me6TREN catalytic system at room temperature leads to the grafting of poly (BisGMA-UDMA) chains onto the graphene surface. The resulting graphene-poly (dimethacrylate- urethane dimethacrylate) (G-PDMA-UDMA) nanocomposites were characterized using FT-IR, XRD, DSC, AFM, FE-SEM, and TEM analysis techniques. It was proved that polymer chains were successfully introduced to the surface of the graphene planes. After grafting with poly (BisGMA-UDMA), the dispersibility of the modified GO sheets significantly improved. When compared to G-PDMA, the resulting G-PDMA-UDMA nanocomposite revealed around 75%, 97%, and 65%, increase in compressive strength, Young's modulus and toughness, respectively. Such smart graphene-based nanocomposites can be used as promising biomaterials in orthopaedic and dental applications with the desired mechanical properties.