Abstract
Three-dimensional interconnected graphite composite foam as a heat conductive matrix was fabricated by using low cost polymeric precursors and polyurethane (PU) foam as carbon source and sacrificial macroporous template, respectively. Erythritol–graphite foam as a stable composite phase change material (PCM) was obtained by incipient wetness impregnation method. The thermophysical properties such as thermal diffusivity, specific heat, thermal conductivity and latent heat of the erythritol–graphite composite foam were measured. From the results, it was found that the thermal conductivity of the erythritol–graphite composite foam (3.77W/mK) was enhanced 5times as compared with that of pristine erythritol (0.72W/mK). This enhancement can significantly reduce the charging and discharging times of the PCM storage system. There is no chemical reaction between erythritol and graphite as confirmed by X-ray diffractometer (XRD). The PCM/foam composite has a melting point of 118°C and latent heat of 251J/g which corresponds to the mass percentage (75wt.%) of the erythritol within the composite foam. The obtained results confirmed the feasibility of using erythritol–graphite foam as a new phase change composite for thermal energy storage (TES) applications, thus it can contribute to the efficient utilization and recovery of solar heat or industrial waste heat.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
