Abstract
In this research, CaCu3.1Ti4O12.1: CC(3.1)TO ceramics were prepared by a simple solid state mixed oxide method. The optimum temperature for calcination the formation of phase pure perovskite and lattice parameters “a” of unit cell close to lattice parameter in the basis JCPDS file was found about 900°C for 8 h. Phase formation was examined by X-ray diffraction technique. The sintering process was carried out at 1000, 1025 and 1050°C for 8 h. The results show that the microstructure of fracture mode for variation sintered samples change from intergranular to intragranular mode with increasing sintering temperature. The density, average grain size, Vickers hardness and dielectric constant were increased with increasing the sintering temperature.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
