Abstract
On the basis of synthesis of a series of solvent based acrylic pressure sensitive adhesives (PSAs) with different crosslinking density, the thermal and rheological properties were characterized. T g values were increased after crosslinked with MDI, and the thermal stability was also improved. Rheological studies were performed via frequency sweep, amplitude sweep, temperature sweep patterns, respectively. The creep recovery properties were also researched. In this way, it was proved that the linear viscoelastic (LVE) range was elongated as the feeding MDI increased, the elastic modulus ( G′) of the acrylic PSAs was obviously increased after crosslinked with MDI whereas hardly making any change to the viscous modulus ( G″). In the frequency sweep pattern, the PSAs samples behave as pseudoplastic non-Newtonian fluid; and zero shear viscosity increased as the feeding MDI mass ratio was increased, after discussing the cross-over frequency (ƒ ⁎ ) and the relaxation time t R , it can be concluded that the addition of MDI would make for the improvement of the elasticity of the PSAs; in the temperature sweep pattern, it could be seen that the cross-over temperatures (where G″= G′) were 34 and 70 °C for the samples crosslinked with 0 wt% and 0.1 wt% MDI, respectively. When the mass ratio of MDI fed was higher than 0.1 wt%, even though the temperature increased to 120 °C, the samples remained elastic ( G′> G″). In the creep recovery test, it was noteworthy that as the feeding ratio of MDI was increased, the creep recovery properties of the acrylic PSAs were substantially improved. And for the same sample, as the applied constant stress increased from 200 to 1000 Pa, the recoverable proportion of the materials was principally not changed in that all the experiments were carried out within the linear viscoelastic range of the samples. And the sample crosslinked with 0.5 wt% MDI shows the highest 180° peel stress.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.