Abstract
In this paper, a new type of pick with a large size head is produced by a low-temperature bimetallic composite. The pick head is composed of 60 mm long high chromium cast iron, and the pick handle is 20# steel. They are connected by nickel-based alloy powder. The size of the bonding interface observed by SEM is approximately 1.3 mm. The pick head is mainly composed of M7C3 and M2C compounds with high wear resistance to bear the wear resistance of the pick. The pick handle with outstanding toughness bears the impact of picks. It is also worth mentioning that the impact toughness of the sample reaches 62 J/cm2 and the shear strength is 208 MPa.The hardness of the handle is about 325HV, and the pick head hardness is about 935HV. The hardness gradually increases from the pick handle to the pick head.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.