Abstract
In this study, the effects of coupling agent and nanoclay loading on the mechanical properties and water absorption of composites are investigated. Composites based on polypropylene (PP), wood flour, nanoclay, and maleated polypropylene (MAPP) were made by melt compounding and then injection molding. The mechanical analysis showed that the biggest improvement of the tensile and flexural strengths can be achieved for the nanoclay loading at 3%. However, further increasing of the loading of nanoclay resulted in a decrease of all the mechanical properties. The maximum tensile and flexural strengths (increase of ∼46%, compared to the pure PP) were achieved in the composites when 7.5% MAPP was used as coupling agent in the manufacture of the composites. Finally, it was found that addition of nanoclay or MAPP reduced the water absorption property of the composites. However, the extent of improvement in the water absorption is more prominent with MAPP.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.