Abstract
It is difficult to perfectly predict the fatigue strength of a bolt in joints at the stage of strength design, since many factors influence the load on the bolt. This study treats the possibility of preventing the fatigue fracture of a bolt by detecting the fatigue crack at the thread root at an early stage by means of the ultrasonic flaw detector. A method is discussed in which the crack is initiated at the bolt thread root near the top surface of the nut in the mating threads by shortening the bolt pitch slightly against the nut pitch. By using this method, it is hoped to lengthen the period from the detection of the crack to the fracture. From the results of fatigue tests, it is clarified that the pitch modification is effective in the case of 0.6% pitch difference and of relatively low mean stress.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: TRANSACTIONS OF THE JAPAN SOCIETY OF MECHANICAL ENGINEERS Series C
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.