Prediction of in vivo joint mechanics of an artificial knee implant using rigid multi-body dynamics with elastic contacts.

Abstract

Lower extremity musculoskeletal computational models play an important role in predicting joint forces and muscle activation simultaneously and are valuable for investigating functional outcomes of the implants. However, current computational musculoskeletal models of total knee replacement rarely consider the bearing surface geometry of the implant. Therefore, these models lack detailed information about the contact loading and joint motion which are important factors for evaluating clinical performances. This study extended a rigid multi-body dynamics simulation of a lower extremity musculoskeletal model to incorporate an artificial knee joint, based upon a novel force-dependent kinematics method, and to characterize the in vivo joint contact mechanics during gait. The developed musculoskeletal total knee replacement model integrated the rigid skeleton multi-body dynamics and the flexible contact mechanics of the tibiofemoral and patellofemoral joints. The predicted contact forces and muscle activations are compared against those in vivo measurements obtained from a single patient with good agreements for the medial contact force (root-mean-square error = 215 N, ρ = 0.96) and lateral contact force (root-mean-square error = 179 N, ρ = 0.75). Moreover, the developed model also predicted the motion of the tibiofemoral joint in all degrees of freedom. This new model provides an important step toward the development of a realistic dynamic musculoskeletal total knee replacement model to predict in vivo knee joint motion and loading simultaneously. This could offer a better opportunity to establish a robust virtual modeling platform for future pre-clinical assessment of knee prosthesis designs, surgical procedures and post-operation rehabilitation.