Prediction of impact response in construction safety helmet using FEA

Abstract

PurposeThis paper aims to present 3D finite element (FE) simulations of impact loading on a construction safety helmet over a headform to improve the ventilation slots profile in helmet design.Design/methodology/approachImpact response on headforms in three different studies considering ventilation slots of varied profiles and dimensions in helmets with rectangular elliptical and circular slots is compared and analysed. Head injury criteria (HIC) and safety regulations from past literature have been considered to evaluate the impact responses.FindingsSimulation results show that a helmet with rectangular ventilation slots achieves a lowest peak impact force of 5941.3 N for a slot area of 170 mm2 as compared to elliptical and circular slots.Research limitations/implicationsVentilation slots of simple geometry (rectangular, elliptical and circular) have been considered in this work. Other/complex geometry slots can also be chosen to predict its effect during impact response on a helmet–headform model. Biofidelic head–neck FE model can be developed to achieve precise results.Practical implicationsThe presented work gives a clear idea to design engineers for the selection of ventilation slot profiles to design a construction safety helmet.Social implicationsConstruction safety (CS) helmets are used to reduce injuries on heads of workers at construction sites in the event of free-falling objects. Rectangular ventilation slots in CS helmets as suggested in the work may reduce the risk of injury.Originality/valueResults are found in good agreement with the past numerical simulation of impact response on a construction safety helmet over a validated biofidelic head FE model.