Predicting axial pressure profile of a CFB

Abstract

Abstract The numerical simulation of CFBs is an important tool in the prediction of its flow behavior. Predicting the axial pressure profile is one of the major difficulties in modeling a CFB. A model using a Particle Based Approach (PBA) is developed to accurately predict the axial pressure profile in CFBs. The simulation model accounts for the axial and radial distribution of voidage and velocity of the gas and solid phases, and for the solids volume fraction and particle size distribution of the solid phase. The model results are compared with and validated against atmospheric cold CFB experimental literature data. Ranges of experimental data used in comparisons are as follows: bed diameter from 0.05 to 0.305 m, bed height between 5 and 15.45 m, mean particle diameter from 76 to 812 μm, particle density from 189 to 2600 kg/m3, solid circulation fluxes from 10.03 to 489 kg/m2 s and gas superficial velocities from 2.71 to 10.68 m/s. The computational results agreed reasonably well with the experimental data. Moreover, both experimental data and model predictions show that the pressure drop profile is affected by the solid circulation flux and superficial velocity values in the riser. The pressure drop increases along the acceleration region as solid circulation flux increases and superficial velocity decreases.