Abstract
Taro Cocoyam is prone to attack by rodents, insect pests and environmental elements. After drying, it is stored to evade wastage. In an effort to efficiently develop storage system, fundamental physical parameter such as volume of the fresh cocoyam with respect to its axial dimensions should be well expressed and modelled for easy estimation. In this study, fresh Taro Cocoyam samples were sourced, cleaned and packaged. Ten unpeeled samples were used in determining initial moisture content (% w.b). The axial dimensions of fifty unpeeled samples were measured and used to compute arithmetic mean diameter (DA). Corresponding true volume (VT) was found using water displacement approach. The bulk samples were grouped based on DA, into seven (7) size ranges. Mean and standard deviation of each parameter were computed. The model was established, verified and validated. Statistical analysis showed that the value of coefficient of determination (R2 ) was almost equals correlation coefficient (r ≈ 1). The values of reduced Chi-square (chc 2 ), root mean square error (RMSE) and mean bias error (MBE) were not that high. The values of coefficient of residual mass (CRM) and modelling efficiency (EF) were almost perfect. Therefore, the model established is practically good for estimating volume of Taro Cocoyam which could find application in the design of feed hopper and storage system.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.