Potential of thermal storage for hot potable water distribution in cruise ships

Abstract

Hot potable water preparation in ships requires lots of energy from the power plant; this is particularly true in modern cruise ships with a high demand of potable water for people, restaurants, spa and pools. Usually the required amount of hot water is instantly produced using a number of different energy sources available on board. However, the use of direct heaters on peak demand conditions increases fuel consumption and greenhouse gas emissions. This is especially important in the case of ship in port configuration, due to the reduced number of active engines and therefore the reduced amount of waste heat from the cooling line usually employed for this task.This paper investigates possible solutions to size a hot water thermal storage in order to compensate the mismatch between heat generation during cruise and heat required during ship in port configuration. The performances of different solutions are compared using dynamic thermal simulations of the ship’s hot water distribution system with different regimes and time dependent heat requirements. Moreover it will be introduced the use of PCM materials with the aim to further improve system’s performance.