Abstract

We report the numerical analysis and the fabrication of a reversed-ridge PLZT film waveguide. It is single-mode, has low transmission loss, and has large transverse cross-section suitable for efficient coupling to single-mode optical fibers. We used this structure to fabricate Mach-Zehnder (MZ) waveguide modulators. The field distribution in the channel and Y branch waveguides was calculated using a beam propagation method to analyze the modal profiles and the propagation loss. The reversed-ridge waveguides and the MZ structures were fabricated on r-sapphire substrates with a patterned ITO spacer film by sol-gel deposition. At 1.55 /spl mu/m the propagation loss was 2.7 dB/cm. In the MZ, the half-wave modulation voltage was 8.5 V using 1.55 /spl mu/m light and electrode length of 3.5 mm.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.