Abstract
AbstractNovel two pixel structures are proposed for high‐resolution active matrix organic light‐emitting diode displays. The proposed two pixels (pixel structures A and B) use the negative feedback method for high‐resolution displays that requires to have small‐sized storage capacitance. The proposed pixel structures A and B improve the luminance uniformity by reducing the voltage distortion in the storage capacitor. However, the proposed pixel structure A is vulnerable to the organic light‐emitting diode (OLED) degradation because the anode voltage of the OLED affects the emission current. In order to compensate the OLED degradation, the proposed pixel structure B stores the turn‐on voltage of OLEDs in the storage capacitor. The simulation results show that the emission current error of the proposed pixel structure B is improved by four times in comparison with the proposed pixel structure A when the OLED turn‐on voltage increases by 0.1 V. Also, the emission current error of the proposed pixel structure B when the threshold voltage of driving thin‐film transistors varies from −2.2 to −1.8 V is from −0.69 least significant bit (LSB) to 0.13 LSB, which shows the excellent luminance uniformity. The proposed pixels are designed for 5.5‐in. full high‐definition displays.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
